Catering racks and trolleys

Array
(
    [0] => Array
        (
            [id] => 109891
            [titulo] => GN 1/1 39 l. / 42 qt Food storage tower with containers
            [content] => 
Maximum hygiene, the design allows the food temperature to be lowered quickly by enabling the circulation of cold air around the outside of the food storage container. Gastroven food storage container towers, in contrast to stacked containers, allow air to circulate around the containers .This way food is cooled more quickly and preserved in better conditions, reducing the risk of proliferation of bacteria and reducing energy consumption.

Araven food storage container towers ensure optimum preservation of food containing humidity (fruits and vegetables). Fresh fruit and vegetables have a high water content. This must be taken into consideration for proper preservation, as over time they release water that can condense on the walls and accumulate at the bottom of the container, causing food to rot. To prevent this, the containers used to store this type of food should not be airtight but rather have a ventilation system enabling the elimination of evaporated water so as to avoid condensation. The structure of the tower acts as a cover for the container, therefore the container does not need an additional lid. This provides the tower with ventilated areas so that the flow of air can cool the food quickly, maintaining it at the correct cool temperature and avoiding the accumulation of water inside the containers, preventing mould from developing. Additionally, the use of Araven’s GastroNorm grilles at the bottom of the container also enables air circulation inside, avoiding water condensation.

            [thumbnail] => https://araven.com/wp-content/uploads/producto_hosteleria/18227_1.jpg
            [medidaTemp] => 562x372x397
            [gastronorm] => GN 1/1
            [capacidad] => 39
            [altura] => 0
            [colorTemp] => Gris 
            [clases] =>  med_562x372x397 col_gris cap_39 capoz_41-2-qt gastro_gn-1-1
            [gastronormOrdenar] => GN 1/1
            [capacidadOrdenar] => 39
            [alturaOrdenar] => 1.0E+20
            [colorTempOrdenar] => Gris 
        )

    [1] => Array
        (
            [id] => 107368
            [titulo] => Tower with 3 Airtight food containers GN 1/1 – 39 liters
            [content] => 
Araven GastroNorm towers allow containers with lids to be stored, optimizing storage space. Maximum use is made of space by allowing vertical storing, increasing storage capacity. Easy to stack and totally accessible: The stacked container with a lid can be reached without having to take off the top containers. You can remove the airtight container without having to move any other container. Storage spaces are kept tidy, speeding up and facilitating work. Maximum food protection. Designed to house GastroNorm containers with lid. Versatility. Suitable for the whole of the 1/1 GastroNorm airtight container range, 100 mm height (PP, PC and silicone) Also stainless steel containers with lid. GastroNorm trolley. Total tightness is provided for containers placed in the GastroNorm tower, which can be fitted with wheels for transport.

Item includes 3 airtight food containers (ref. 03036)

            [thumbnail] => https://araven.com/wp-content/uploads/producto_hosteleria/19861_torre_cubetas_gastronormgn11.jpg
            [medidaTemp] => 562x372x397
            [gastronorm] => GN 1/1
            [capacidad] => 39
            [altura] => 0
            [colorTemp] => Gris 
            [clases] =>  med_562x372x397 col_gris cap_39 capoz_41-2-qt gastro_gn-1-1
            [gastronormOrdenar] => GN 1/1
            [capacidadOrdenar] => 39
            [alturaOrdenar] => 1.0E+20
            [colorTempOrdenar] => Gris 
        )

    [2] => Array
        (
            [id] => 109875
            [titulo] => GN 1/1 39 l. / 42 qt Food storage tower, containers with lid
            [content] => 
Maximum hygiene, the design allows the food temperature to be lowered quickly by enabling the circulation of cold air around the outside of the food storage container. Gastroven food storage container towers, in contrast to stacked containers, allow air to circulate around the containers .This way food is cooled more quickly and preserved in better conditions, reducing the risk of proliferation of bacteria and reducing energy consumption.

Araven GastroNorm towers allow containers with lids to be stored, optimizing storage space. Maximum use is made of space by allowing vertical storing, increasing storage capacity. Easy to stack and totally accessible: The stacked container with a lid can be reached without having to take off the top containers. You can remove the airtight container without having to move any other container. Storage spaces are kept tidy, speeding up and facilitating work. Maximum food protection. Designed to house GastroNorm containers with lid. Versatility. Suitable for the whole of the 1/1 and 1/2 GastroNorm airtight container range, 100 mm height (PP, PC and silicone) Also stainless steel containers with lid. GastroNorm trolley. Total tightness is provided for containers placed in the GastroNorm tower, which can be fitted with wheels for transport.

            [thumbnail] => https://araven.com/wp-content/uploads/producto_hosteleria/18861_torre_cubetas_gastronormgn11_0.jpg
            [medidaTemp] => 562x372x397
            [gastronorm] => GN 1/1
            [capacidad] => 39
            [altura] => 0
            [colorTemp] => Translucido 
            [clases] =>  med_562x372x397 col_translucido cap_39 capoz_41-2-qt gastro_gn-1-1
            [gastronormOrdenar] => GN 1/1
            [capacidadOrdenar] => 39
            [alturaOrdenar] => 1.0E+20
            [colorTempOrdenar] => Translucido 
        )

    [3] => Array
        (
            [id] => 109899
            [titulo] => GN 1/2 18 l. / 19 qt Food storage tower with containers
            [content] => 
Maximum hygiene, the design allows the food temperature to be lowered quickly by enabling the circulation of cold air around the outside of the food storage container. Gastroven food storage container towers, in contrast to stacked containers, allow air to circulate around the containers .This way food is cooled more quickly and preserved in better conditions, reducing the risk of proliferation of bacteria and reducing energy consumption.

Araven food storage container towers ensure optimum preservation of food containing humidity (fruits and vegetables). Fresh fruit and vegetables have a high water content. This must be taken into consideration for proper preservation, as over time they release water that can condense on the walls and accumulate at the bottom of the container, causing food to rot. To prevent this, the containers used to store this type of food should not be airtight but rather have a ventilation system enabling the elimination of evaporated water so as to avoid condensation. The structure of the tower acts as a cover for the container, therefore the container does not need an additional lid. This provides the tower with ventilated areas so that the flow of air can cool the food quickly, maintaining it at the correct cool temperature and avoiding the accumulation of water inside the containers, preventing mould from developing. Additionally, the use of Araven’s GastroNorm grilles at the bottom of the container also enables air circulation inside, avoiding water condensation.

            [thumbnail] => https://araven.com/wp-content/uploads/producto_hosteleria/18237_1.jpg
            [medidaTemp] => 357x312x397
            [gastronorm] => GN 1/2
            [capacidad] => 18
            [altura] => 0
            [colorTemp] => Gris 
            [clases] =>  med_357x312x397 col_gris cap_18 capoz_19-qt gastro_gn-1-2
            [gastronormOrdenar] => GN 1/2
            [capacidadOrdenar] => 18
            [alturaOrdenar] => 1.0E+20
            [colorTempOrdenar] => Gris 
        )

    [4] => Array
        (
            [id] => 107360
            [titulo] => Tower with 3 Airtight food container GN 1/2 – 18 liters
            [content] => 
Araven GastroNorm towers allow containers with lids to be stored, optimizing storage space. Maximum use is made of space by allowing vertical storing, increasing storage capacity. Easy to stack and totally accessible: The stacked container with a lid can be reached without having to take off the top containers. You can remove the airtight container without having to move any other container. Storage spaces are kept tidy, speeding up and facilitating work. Maximum food protection. Designed to house GastroNorm containers with lid. Versatility. Suitable for the whole of the 1/1 GastroNorm airtight container range, 100 mm height (PP, PC and silicone) Also stainless steel containers with lid. GastroNorm trolley. Total tightness is provided for containers placed in the GastroNorm tower, which can be fitted with wheels for transport.

Item includes 3 airtight food containers (ref. 03033)

            [thumbnail] => https://araven.com/wp-content/uploads/producto_hosteleria/19862_torre_cubetas_gastronormgn12.jpg
            [medidaTemp] => 357x312x397
            [gastronorm] => GN 1/2
            [capacidad] => 18
            [altura] => 0
            [colorTemp] => Gris 
            [clases] =>  med_357x312x397 col_gris cap_18 capoz_19-qt gastro_gn-1-2
            [gastronormOrdenar] => GN 1/2
            [capacidadOrdenar] => 18
            [alturaOrdenar] => 1.0E+20
            [colorTempOrdenar] => Gris 
        )

    [5] => Array
        (
            [id] => 109883
            [titulo] => GN 1/2 18 l. / 19 qt Food storage tower, containers with lid
            [content] => 
Maximum hygiene, the design allows the food temperature to be lowered quickly by enabling the circulation of cold air around the outside of the food storage container. Gastroven food storage container towers, in contrast to stacked containers, allow air to circulate around the containers .This way food is cooled more quickly and preserved in better conditions, reducing the risk of proliferation of bacteria and reducing energy consumption.

Araven GastroNorm towers allow containers with lids to be stored, optimizing storage space. Maximum use is made of space by allowing vertical storing, increasing storage capacity. Easy to stack and totally accessible: The stacked container with a lid can be reached without having to take off the top containers. You can remove the airtight container without having to move any other container. Storage spaces are kept tidy, speeding up and facilitating work. Maximum food protection. Designed to house GastroNorm containers with lid. Versatility. Suitable for the whole of the 1/1 and 1/2 GastroNorm airtight container range, 100 mm height (PP, PC and silicone) Also stainless steel containers with lid. GastroNorm trolley. Total tightness is provided for containers placed in the GastroNorm tower, which can be fitted with wheels for transport.

            [thumbnail] => https://araven.com/wp-content/uploads/producto_hosteleria/18862_torre_cubetas_gastronormgn12_0.jpg
            [medidaTemp] => 357x312x397
            [gastronorm] => GN 1/2
            [capacidad] => 18
            [altura] => 0
            [colorTemp] => Translucido 
            [clases] =>  med_357x312x397 col_translucido cap_18 capoz_19-qt gastro_gn-1-2
            [gastronormOrdenar] => GN 1/2
            [capacidadOrdenar] => 18
            [alturaOrdenar] => 1.0E+20
            [colorTempOrdenar] => Translucido 
        )

    [6] => Array
        (
            [id] => 109867
            [titulo] => Standard Shelving
            [content] => 
ARAVEN shelving units are designed based on the recommendations of the CODEX ALIMENTARIUS International Code of Good Practice regarding food health and hygiene. Ideal for HACCP self-management programs and schedules carried out in establishments handling food products. Designed taking into account food health and hygiene criteria: The quality of the materials used (PP and anodised aluminium), means that they are not affected by humidity, and are wholly suitable for use in the described atmospheres. The perforated shelves favor air circulation. Manufactured in polypropylene, they can be removed for safe washing in a dishwasher, avoiding possible accumulations of food remains in those areas in contact with containers and other food products.

            [thumbnail] => https://araven.com/wp-content/uploads/producto_hosteleria/estanteria_shelving.jpg
            [medidaTemp] => 975x475x1671
            [gastronorm] => 
            [capacidad] => 0
            [altura] => 0
            [colorTemp] => Azul 
            [clases] =>  med_975x475x1671 col_azul
            [gastronormOrdenar] => ZZZZZZZZZZZZ
            [capacidadOrdenar] => 1.0E+20
            [alturaOrdenar] => 1.0E+20
            [colorTempOrdenar] => Azul 
        )

    [7] => Array
        (
            [id] => 109851
            [titulo] => Extendable Shelving 2
            [content] => ARAVEN extendable shelving units are designed based on the recommendations of the CODEX ALIMENTARIUS International Code of Good Practice regarding food health and hygiene. Ideal for HACCP self-management programs and schedules carried out in establishments handling food products. Designed taking into account food health and hygiene criteria: The quality of the materials used (PP and anodised aluminium), means that they are not affected by humidity, and are wholly suitable for use in the described atmospheres. The perforated shelves favor air circulation. Manufactured in polypropylene, they can be removed for safe washing in a dishwasher, avoiding possible accumulations of food remains in those areas in contact with containers and other food products.
Araven’s extendable shelving with telescopic supports adapts to different sizes, from 3243/64” to 7847/64”. The chief advantage of this product is that the shelving adapts to the space available; there is no longer any need to order custom shelving. This means that costs are optimized and obtained savings. The shelving is delivered flat-packed in a compact box with a carrier handle, making this system easy for end user transport.
            [thumbnail] => https://araven.com/wp-content/uploads/producto_hosteleria/estanteria_extensible_shelving_00951_0.jpg
            [medidaTemp] => 1390<18401671
            [gastronorm] => 
            [capacidad] => 0
            [altura] => 0
            [colorTemp] => Azul 
            [clases] =>  med_1390 col_azul
            [gastronormOrdenar] => ZZZZZZZZZZZZ
            [capacidadOrdenar] => 1.0E+20
            [alturaOrdenar] => 1.0E+20
            [colorTempOrdenar] => Azul 
        )

    [8] => Array
        (
            [id] => 109859
            [titulo] => Extendable Shelving 1
            [content] => ARAVEN extendable shelving units are designed based on the recommendations of the CODEX ALIMENTARIUS International Code of Good Practice regarding food health and hygiene. Ideal for HACCP self-management programs and schedules carried out in establishments handling food products. Designed taking into account food health and hygiene criteria: The quality of the materials used (PP and anodised aluminium), means that they are not affected by humidity, and are wholly suitable for use in the described atmospheres. The perforated shelves favor air circulation. Manufactured in polypropylene, they can be removed for safe washing in a dishwasher, avoiding possible accumulations of food remains in those areas in contact with containers and other food products.
Araven’s extendable shelving with telescopic supports adapts to different sizes, from 3243/64” to 7847/64”. The chief advantage of this product is that the shelving adapts to the space available; there is no longer any need to order custom shelving. This means that costs are optimized and obtained savings. The shelving is delivered flat-packed in a compact box with a carrier handle, making this system easy for end user transport.
            [thumbnail] => https://araven.com/wp-content/uploads/producto_hosteleria/estanteria_extensible_shelving00950.jpg
            [medidaTemp] => 890<1350x1671
            [gastronorm] => 
            [capacidad] => 0
            [altura] => 0
            [colorTemp] => Azul 
            [clases] =>  med_890 col_azul
            [gastronormOrdenar] => ZZZZZZZZZZZZ
            [capacidadOrdenar] => 1.0E+20
            [alturaOrdenar] => 1.0E+20
            [colorTempOrdenar] => Azul 
        )

    [9] => Array
        (
            [id] => 107408
            [titulo] => Under shelf support
            [content] => With Under shelf support for shelving creates a new additional food storage housing. Guide system enabling  easy  horizontal container extraction. Avoiding stacking.  It can be located anywhere along the shelf, adapting to any GN measurement.
            [thumbnail] => https://araven.com/wp-content/uploads/2022/05/Soporte-bajo-balda.jpg
            [medidaTemp] => 460x39,5x70
            [gastronorm] => 
            [capacidad] => 0
            [altura] => 0
            [colorTemp] => Azul oscuro 
            [clases] =>  med_460x395x70 col_azul-oscuro
            [gastronormOrdenar] => ZZZZZZZZZZZZ
            [capacidadOrdenar] => 1.0E+20
            [alturaOrdenar] => 1.0E+20
            [colorTempOrdenar] => Azul oscuro 
        )

    [10] => Array
        (
            [id] => 107376
            [titulo] => Wheels
            [content] => 
Insertable wheels to get a useful cart. Easily to assemble and dismantle

Available in set of 4 units 

            [thumbnail] => https://araven.com/wp-content/uploads/producto_hosteleria/rueda_torre_gastronorm_araven_detalle__1.jpg
            [medidaTemp] => 100
            [gastronorm] => 
            [capacidad] => 0
            [altura] => 0
            [colorTemp] => Gris 
            [clases] =>  med_100 col_gris
            [gastronormOrdenar] => ZZZZZZZZZZZZ
            [capacidadOrdenar] => 1.0E+20
            [alturaOrdenar] => 1.0E+20
            [colorTempOrdenar] => Gris 
        )

)

GN 1/1 39 l. / 42 qt Food storage tower with containers

Tower with 3 Airtight food containers GN 1/1 – 39 liters

GN 1/1 39 l. / 42 qt Food storage tower, containers with lid

GN 1/2 18 l. / 19 qt Food storage tower with containers

Tower with 3 Airtight food container GN 1/2 – 18 liters

GN 1/2 18 l. / 19 qt Food storage tower, containers with lid

Standard Shelving

Extendable Shelving 2

Extendable Shelving 1

Under shelf support

Wheels